CTS(N.B) Series Wet Drum Magnetic Separator

CTS (NB) Series Wet permanent magnetic drum separator use for obtain strong magnetic minerals, or remove the mixed ferromagnetic minerals in non-magnetic minerals. The machine can continuously feeding and unloading ore, have the big depth of magnetic field strength, large work space, with high processing power.

CTB Series Wet Drum Magnetic Separator

Counter rotation wet drum separator

Counter rotation wet drum separator for the automatic and continuous concentration of both ferrous and weakly magnetic ores. Can process material between 0-3mm in size.

Counter rotation wet drum separator Features

1) Quality magnets provide for a stable and long lasting performance.

2) The shaft is well protected from the magnet sustem to allow it to run safely.

3) The sludge discharge points on both sides of the tank allow for easy and a mess free cleaning environment.

CTS eries Wet Drum Magnetic Separator

Concurrent wet drum separator

This series features a shorter pickup area and is for the high capacity separation of material sized between 0-12 mm. It is generally best suited for the rougher separation of coarse material such as ocean, lake or river sand.

Concurrent wet drum separator Features

1) The magnets are well protected from any peeling or damage that may normally occur.

2) The concurrent tank design creates a unit that can not just handle a large capacity, but, operate in a virtually jam free environment.

3) The sludge discharge points on both sides of the tank allow for easy and a mess free cleaning environment.

CTN eries Wet Drum Magnetic Separator

Counter current wet drum separator

This series features a large pickup area and the Multi-pole with small gap magnet layout. By handing a small material size of between 0-3mm. It is generally used for a cleaner or at the finisher sizes.

Counter current wet drum separator Features

1) Quality magnets provide for a stable and long lasting performance.

2) The shaft is well protected from the magnet system to allow it to run safely.

3) The sludge discharge points on both sides of the tank allow for easy and a mess free cleaning environment.

Product features are:

the use of computer optimized design, magnetic circuit, and strict selection of high coercivity, high remanence NdFeB rare earth permanent magnets, magnetic ensure a long period of time without reducing the safeguard of long-term interests, the overall structure of reliable and durable. 

The CTS, CTN and CTB series permanent magnetic cylinder separators have two kinds of structures: rotary and fixed. The fixed one is suitable for choosing fine strong-magnetic particles in wet and weak magnetic fields. It also can be used to remove the strong-magnetic minerals among non-magnetic minerals.

Working Principle:

When the slurry flows into the magnetic field, the strong-magnetic minerals are adsorbed on the surface of the cylinder, and the weak-magnetic and non-magnetic minerals are sorted out. And then, the strong-magnetic minerals are brought out of the magnetic field with the cylinder rotating. The rotary one is suitable for choosing fine strong-magnetic (moderately strong-magnetic) particles in dry condition. Due to the high speed rotation, the roll number of the magnetic particle is much higher than the ordinary magnetic separator’s. This has a significant effect on destroying the magnetic agglomeration and improving the rich ore ratio. After separating, the minerals are sorted into magnetic and non-magnetic and excluded from their own mouth.

The rotary one is applicable to the rough selection and concentration of the ore particle size of 0.6-6mm. The one cylinder can be equipped with three types of tank, namely downstream launder

(CTS) classification size≤6mm, countercurrent launder

(CTN) classification size ≤0.6mm and semi-countercurrent launder

(CTB) classification size≤1mm.

Application:

To separate strong magnetic minerals from fine particles by weak magnetic field,or remove the strong magnetic impurities mixed in non-magnetic minerals.This device is specifically designed for the non-metallic mining industry.

Technical Characteristics

According to different separation processes and particle sizes, there are two types of tanks, counter current and semi-counter current, which can be chosen.Computer optimized design, reasonable magnetic circuit.large magnetic permeability depth and cross or flip magnetic field arrangement is more conducive to the separation of magnetic materials.

Reliable and durable structure.Low operating cost .

Multiple magnetic field strengths to choose from.

Double-layer stainless steel drum shell ,making the service life of the drum body more longer.

The machine has three tank: half countercurrent tank (CTB); downstream tank (CTS) and countercurrent tank (CTN), applicable to the requirements of the different options particle size and different election process.

Structural drawings:

Parameter table: